Nokia Cable Box CA 55 User Manual

Nokia Converter (CA-55)

Installation guide

9238687

Issue 1

YOUR SAFETY

Read these simple guidelines. Breaking the rules may be dangerous or illegal. Further

detailed information is given in this installation guide.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the vehicle while

driving. Your first consideration while driving should be road safety.

INTERFERENCE

All wireless phones may be susceptible to interference, which could affect

performance.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user guide for detailed safety

instructions. Do not connect incompatible products.

■ General information

The CA-55 converter allows you to use your CARK-91 car kit with compatible Nokia phones

and compatible mobile holders that have a Pop-Port™ connector.

The CA-55 converter is designed to give optimal performance when used with the MP-2

microphone that can be purchased separately.

Read this installation guide carefully before installing the converter cable. For details

regarding your CARK-91 car kit, see its installation guide that is also available on the

Note that the illustrations in this guide are for reference only.

1. Installation

Before you install the converter, it is necessary to remove some parts of the car

interior. After the installation, re-attach those parts.

1. When the car ignition is turned off, remove the MCC-1 mobile holder from

your car.

2. Disconnect the antenna cable of the MCC-1 mobile holder from the external

antenna.

3. Disconnect the system cable of the MCC-1 mobile holder from the HFU-2

hands-free unit that is supplied with your CARK-91 car kit.

4. Mount your new compatible mobile holder securely to the original place of the

holder. If necessary, also mount the appropriate antenna coupler. For details,

see the sales package of your new mobile holder.

5. Plug the converter cable into the HFU-2 hands-free unit.

6. Plug the converter cable into the mobile holder.

7. If necessary, replace the original microphone with the MP-2 microphone.

8. If necessary, connect the antenna cable of your antenna coupler or mobile

holder with the cable of the external antenna.