Nokia Telephone SCH i830 User Manual

SCH-i830 Series  
User Guide  
Please read this manual before operating your phone,  
and keep it for future reference.  
XL16.(2.6V.Q)_MG_i830_010705_D1  
 
Table of Contents  
Section 1: Getting Started .........................................9  
Activating Your Phone ............................................................ 10  
Setting Up Your Voicemail ..................................................... 10  
Customer Support .................................................................. 11  
Understanding this User Manual ............................................ 11  
Section 2: Understanding Your Phone ..................13  
Unpacking .............................................................................. 14  
Front View of Your Phone ...................................................... 15  
Key Functions ........................................................................ 16  
Command Keys ...................................................................... 18  
Powering On ....................................................................................... 18  
Your Pocket PC’s Keypad .................................................................. 18  
Navigation/OK Key ............................................................................. 18  
Send Key ............................................................................................ 18  
Back/Clear key ................................................................................... 19  
Voice memo key ................................................................................. 19  
Volume up/down keys ........................................................................ 19  
Locking Your Phone ............................................................... 20  
Lock the i830 ...................................................................................... 20  
Unlock the i830 ................................................................................... 20  
Password Hint .................................................................................... 21  
Battery .................................................................................... 22  
Install the battery ................................................................................ 22  
Remove the battery ............................................................................ 23  
Charge the battery .............................................................................. 23  
Checking battery charge ..................................................................... 23  
Battery capacity .................................................................................. 24  
Section 3: Call Functions ........................................25  
Making a Call ......................................................................... 26  
Answering a Call .................................................................... 26  
Using the speakerphone ........................................................ 26  
Table of Contents  
3
 
Display Your Phone Number .................................................. 26  
Call History ............................................................................. 26  
Roaming ................................................................................. 27  
What is Roaming ................................................................................ 27  
Roaming Options ................................................................................ 27  
Section 7: Messaging ..............................................45  
Types of Messages ................................................................ 46  
Messaging Inbox .................................................................... 46  
Messaging Outbox ................................................................. 46  
Text Messages ....................................................................... 46  
Create and send a text message ........................................................ 47  
Messaging .............................................................................. 47  
About E-mail setup ................................................................. 49  
TTY ........................................................................................ 28  
Voice Signal ........................................................................... 28  
Section 4: Menu Navigation ....................................29  
Navigating Your PDA ............................................................. 30  
Menu Types ........................................................................... 30  
E-mail using ActiveSync ......................................................... 49  
ActiveSync Message Folders ............................................................. 50  
Access ActiveSync Message Folders ................................................. 50  
Launcher/Task Manager ........................................................ 31  
Opening Launcher .............................................................................. 31  
Launcher Groups ................................................................................ 31  
E-mail using an ISP ................................................................ 50  
Setup an ISP ...................................................................................... 51  
Section 8: Changing Your Settings ........................53  
i830 Settings .......................................................................... 54  
Buttons Settings ..................................................................... 54  
Section 5: Entering Text ..........................................33  
Selecting Text Input Mode ..................................................... 34  
Block Recognizer ................................................................... 34  
Keyboard ................................................................................ 35  
Letter Recognizer ................................................................... 35  
Transcriber ............................................................................. 36  
Word Completion ................................................................... 36  
Text Entering Options ............................................................ 37  
Sound Settings ....................................................................... 55  
PDA/Phone Ringer Volume ................................................................ 55  
WOW XT Audio Processing ............................................................... 55  
CarKit Volume .................................................................................... 56  
Sounds and Notifications .................................................................... 56  
Turn volume off ................................................................................... 57  
Password Setting ................................................................... 57  
Phone Settings ....................................................................... 57  
Phone Tab .......................................................................................... 58  
Section 6: Contacts .................................................39  
Understanding Your Contacts ................................................ 40  
Add a new contact .............................................................................. 41  
Find a contact ..................................................................................... 41  
Delete a contact .................................................................................. 42  
Make a call from contacts ................................................................... 42  
Memory Info ........................................................................................ 42  
.Beam a contact via IR ....................................................................... 42  
Section 9: Personal Digital Assistant ....................59  
Your Personal Digital Assistant .............................................. 60  
Picsel Browser ....................................................................... 60  
Launching the Picsel Browser ............................................................ 60  
Microsoft Pocket Applications ................................................ 61  
MSN Messenger ................................................................................. 61  
Pocket Internet Explorer ..................................................................... 61  
Pocket Word ....................................................................................... 61  
Pocket Excel ....................................................................................... 62  
Adding Notes to Contacts ...................................................... 43  
Adding a note ..................................................................................... 43  
Deleting a note ................................................................................... 43  
Speed Dial Contacts .............................................................. 44  
4
Table of Contents  
Table of Contents  
5
 
Sprite Backup Utility ............................................................... 62  
Caller ID ................................................................................. 76  
Application Management ........................................................ 62  
Install new applications ....................................................................... 62  
Delete an application .......................................................................... 63  
Section 12: Bluetooth ..............................................77  
About Bluetooth ...................................................................... 78  
Bluetooth Modes .................................................................... 78  
On/Off Mode ....................................................................................... 78  
Discoverable ....................................................................................... 78  
Memory Adjustments ............................................................. 63  
Section 10: Personal Organizer ..............................65  
Calendar ................................................................................. 66  
Schedule an appointment ................................................................... 66  
Schedule a timed appointment ........................................................... 66  
Change the Calendar view ................................................................. 66  
Calendar Options ................................................................................ 66  
Turning Bluetooth On/Off ....................................................... 79  
Making your i830 Discoverable .............................................. 79  
Bluetooth Bonds ..................................................................... 80  
Beaming Using Bluetooth ....................................................... 80  
Today Screen ......................................................................... 67  
Date and time settings ........................................................................ 67  
Owner Information .............................................................................. 67  
Message/Task Status ......................................................................... 67  
Current Appointments ......................................................................... 68  
Bluetooth Status ................................................................................. 68  
Section 13: Accessories and Games .....................81  
Acessories ................................................................82  
Remote Control ...................................................................... 82  
Beam ...................................................................................... 82  
SD I/O Expansion Slot ........................................................... 82  
Tasks List ............................................................................... 68  
New Command ...................................................................... 69  
Notes ...................................................................................... 69  
Alarm ...................................................................................... 70  
Schedule an alarm .............................................................................. 70  
Calculator ............................................................................... 70  
Using the calculator ............................................................................ 70  
ActiveSync® ........................................................................... 71  
System requirements .......................................................................... 71  
Games .......................................................................83  
Jawbreaker_i830 .................................................................... 83  
Solitaire_i830 ......................................................................... 83  
Health and safety information ................................85  
Exposure to radio frequency (RF) signals .......................................... 85  
Road safety ........................................................................................ 89  
Operating environment ....................................................................... 90  
Electronic devices ............................................................................... 90  
Potentially explosive environment ...................................................... 92  
Emergency calls ................................................................................. 93  
Other important safety information ..................................................... 94  
Care and maintenance ....................................................................... 95  
Acknowledging special precautions and the FCC and industry canada  
notice .................................................................................................. 96  
Install ActiveSync ................................................................... 71  
Connect the cradle ............................................................................. 72  
Setup a partnership ............................................................................ 72  
ActiveSync via IR ................................................................................ 73  
Section 11: Network Services .................................75  
Call Forwarding ...................................................................... 76  
Three-way Calling .................................................................. 76  
Call Waiting ............................................................................ 76  
Glossary ............................................................................... 100  
6
Table of Contents  
Table of Contents  
7
 
8
Table of Contents  
 
Section 1: Getting Started  
Topics Covered  
Activating your phone  
Setting Up Voicemail  
Customer Support  
Understanding this User Manual  
This section allows you to start using your phone by  
activating your service, setting up your voice mail, contacting  
customer support, or getting an understanding of how this  
manual is put together.  
Section 1: Getting Started  
9
 
Customer Support  
Activating Your Phone  
Customer Support  
If you purchased your phone at a Verizon Wireless Store, it is  
probably activated and ready to use. If you have upgraded  
your phone or received a new phone by mail, it probably needs  
to be activated before you can use it.  
[Verizon to determine if they want to add information here  
for their customers or remove this section completely.]  
Understanding this User Manual  
To activate your phone, follow these steps:  
The chapters of this guide generally follow the same order as  
the menus and sub menus in your phone. A robust index for  
quick reference to most features begins on page 184.  
Also included is important safety information that you should  
know before using your phone. Most of this information is near  
the back of the guide, beginning on page page 152.  
1. Visit a Verizon Wireless Store and have your phone activated,  
MY ACCOUNT tab available on the home page.  
2. When the drop-down menu displays, select ACTIVATE  
PHONE to display instructions needed to activate your phone  
online.  
3. After gathering the required materials, select the Activate  
New Phone link and follow the online directions to complete  
the activation process.  
Setting Up Your Voicemail  
If a new voicemail is received, a notification screen is displayed  
alerting you that a new message is available. If multiple  
voicemail messages are received, the notification screen  
displays the number of new messages received.  
10  
Section 1: Getting Started  
Section 1: Getting Started  
11  
 
12  
Section 1: Getting Started  
 
Section 2: Understanding Your Phone  
Topics Covered  
Unpacking  
Front View of Your Phone  
Key Functions and Command Keys  
Understanding the Display Screen  
Battery  
This section outlines some key features of your phone. It also  
displays the screen and the icons that will are displayed  
when the phone is in use.  
Section 2: Understanding Your Phone  
13  
 
Front View of Your Phone  
Unpacking  
Front View of Your Phone  
Handset  
Standard and Extended battery  
Receiver  
Title Bar  
Desktop Charger  
TC  
Most Recent  
Applications  
Bar keys  
QRG  
UG CD  
Companion CD  
ActiveSync CD  
Holster  
Display  
Headset  
4-way  
Navigation Key  
Stylus  
OK key  
END Key  
Power Conversion Plug  
SEND Key  
Voice Memo  
Key  
Volume Keys  
Backspace/  
Clear Key  
Voicemail Key  
SD Card I/O  
Microphone  
Alpha-Numeric  
Keypad  
Power/Interface  
Connector  
14  
Section 2: Understanding Your Phone  
Section 2: Understanding Your Phone  
15  
 
Key Functions  
13. Space/Pound Key: Enters the pound [#] character for calling  
features. In text entry mode, press to enter a space or press  
and hold to open the symbols table.  
Key Functions  
1. Receiver: The receiver allows you to hear the other caller and  
the different ring tones and sounds offered by your phone.  
14. SD I/O Slot: This expansion slot allows you to insert an SD  
memory card to add additional memory and storage capacity.  
This allows you to play games, store large data files, and listen  
to and store music and video clips.  
2. Application Icons: These icons represent the applications that  
are available on your phone.  
3. Display Screen: This screen displays all the information  
needed to operate your phone.  
15. END Key: Ends a call. Press and hold this key for a few  
seconds to turn your phone On or Off. When you receive an  
incoming call, press to mute the ringer and send the call to  
voicemail.  
4. OK Key: Pressing when navigating through a menu accepts  
the highlighted choice in the menu.  
5. Volume Key: Allows you to adjust the ringer volume in standby  
mode (with the flip open) or adjust the voice volume during a  
call. To mute the ringer during an incoming call, press the  
volume key up or down.  
16. BACK Key: Deletes characters from the display when you are  
in text entry mode. When in a menu, press to return to the  
previous menu. This key also allows you to return to the  
previous screen in a Sprint PCS Vision session.  
6. TALK Key: Allows you to place or receive a call. In standby  
mode, press the key once to access the Outgoing call log.  
17. Navigation Key: This key allows you to scroll through the  
phone menu options.  
7. Voice Memo Key: This key launches the voice notes option  
which allows you to record voice notes and save them on your  
phone.  
18. SEND Key: This key is used to iniatiate your calls or to  
activate your phone when the slider is down.  
8. Voicemail Key: Press and hold to automatically dial your  
19. Signal Strength Indicator: This icon represents the signal  
strength by displaying bars. The more bars displayed, the  
better the signal strength.  
voicemail.  
9. Keypad: Use these keys to enter numbers, letters, and  
characters.  
20. Charging/Battery Indicator: This icon indicates the battery  
level or charging status of the battery.  
10. Shift/Asterisk Key: Enters the asterisk [*] character for calling  
features. In text entry mode, press to change the character  
input type.  
11. Microphone: The Microphone allows the other caller to hear  
you clearly when you are speaking to them.  
12. Power/Accessory Interface Connector: The power/accessory  
interface connector is used to plug in the charging accessories  
and also connect any available accessory cables to your  
phone.  
16  
Section 2: Understanding Your Phone  
Section 2: Understanding Your Phone  
17  
 
Command Keys  
Back/Clear key  
Press to close the current menu and return to the previous  
Command Keys  
Powering On  
menu or screen. While in any text edit screen, you can also  
To power up the i830, press the  
on the lower left side of the phone. Follow the steps on the  
display screen to calibrate the device.  
key down, which is located  
press  
to backspace and clear text. Press and hold  
to  
clear all text in the field.  
Voice memo key  
Your Pocket PC’s Keypad  
Briefly press the Record/Memo key (  
) to record or display  
The keys of the i830 are functionally divided into three groups.  
The Navigation keys, Alphanumeric keypad, and Hot keys (on  
each side of the Pocket PC).  
any recordings that you have made. You have the option of  
recording a new memo or playing back an old memo.  
Once the record list appears in the display, press the left soft  
1. Navigation: Access and scroll through menus and lists,  
confirm changes that you’ve entered, and interact with menus  
that appear in the display.  
key (  
) Record to record a new memo.  
1. Press the right soft key (  
) Menu to display a pop-up menu  
containing Play, Record, Rename, or Delete.  
2. Typing: Enter text, numbers, and symbols.  
2. Press the up or down arrows (  
or  
) on the Navigation  
3. Hot keys: Located on both sides of the Pocket PC. Used to  
launch applications, increase volume, power the Pocket PC on  
and off, and more.  
key to highlight your selection.  
3. Press  
to confirm your choice.  
Volume up/down keys  
Press and release the up or down volume keys  
audio volume for any screen.  
to adjust  
Navigation/OK Key  
Use any of the four directional arrows on the Navigation/OK  
key to scroll through and highlight items, menus, and  
programs in a list or on the Internet. Once an item, link, or  
menu is highlighted, press  
to the selection.  
to perform the function related  
Send Key  
Press  
at the Today screen to display the phone screen, or  
to dial a call after you have entered a telephone number.  
18  
Section 2: Understanding Your Phone  
Section 2: Understanding Your Phone  
19  
 
Locking Your Phone  
6. Tap the box to the left of Prompt if device unused for to remove  
Locking Your Phone  
the check mark.  
When you lock your phone, it requires a password to return to  
normal operation. When a password is set up, the phone can be  
locked immediately or configured to lock when the screen  
blanks out.  
7. Tap  
, then tap Yes to confirm.  
Password Hint  
Use the Hint feature to provide a password hint in case you  
forget your password.  
Lock the i830  
1. At the Password screen, tap the Hint tab.  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Settings.  
2. Enter a hint for your password in the dialogue box.  
3. Tap  
to save your settings and exit.  
3. Tap the Personal tab.  
4. Tap Password.  
Note: The password hint you set will only appear after four consecutive  
incorrect password entries.  
5. Tap the check box next to Prompt if device unused for  
.
6. Tap the drop down arrow to select the amount of unused time  
before you are prompted for a password.  
7. Select one of the following options:  
Simple 4 digit password  
Strong alphanumeric password  
8. Tap the Password box and enter the password you want.  
9. Tap , then tap Yes to confirm.  
Unlock the i830  
To unlock your phone:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Settings.  
3. Tap the Personal tab.  
4. Tap Password.  
5. Tap your password on the keypad. If you enter the correct  
password, you’re returned to the Password screen.  
20  
Section 2: Understanding Your Phone  
Section 2: Understanding Your Phone  
21  
 
Battery  
Remove the battery  
Battery  
Push the battery release latch, then slide the battery toward the bot-  
tom end of the phone.  
The i830 comes with a standard rechargeable battery, power  
accessory, and headset.  
Charge the battery  
Note: The battery for the i830 can be charged before it is fully drained without  
causing damage.  
Note: The i830 comes with a rechargeable battery. Fully charge this battery  
before using your phone.  
Install the battery  
Your phone is powered by a rechargeable standard Liion  
battery. Only use Samsungapproved charging devices and  
batteries. Samsung accessories are designed to maximize  
battery life. Using other accessories may invalidate your  
warranty and may cause damage.  
1. Place the battery on the back of the phone, making sure the  
plastic tabs are aligned with the corresponding holes in the  
phone.  
2. Gently push the battery up until it snaps into place.  
Use the dual desktop charger/cradle or the travel adapter to  
charge the battery provided with your handset.  
Checking battery charge  
Keeping track of the batterys charge is important. If the battery  
level becomes too low, your phone automatically shuts down  
and you could lose important data. For a quick check of your  
phones battery level, tap the time located in the upper right  
corner of the screen. A battery icon is displayed in the Time  
and Next Appointment window.  
To perform a battery check using the drop down menu:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Settings.  
3. Tap the System tab at the bottom of the screen.  
4. Tap Power.  
22  
Section 2: Understanding Your Phone  
Section 2: Understanding Your Phone  
23  
 
Battery capacity  
When the battery becomes low, a warning window is displayed  
and the unit automatically turns off the LCD. When there are  
approximately two minutes of talk time left, the phone sounds  
an audible alert every 30 seconds and then powers down.  
Note: Long backlight settings, searching for service, vibrate mode and browser  
use affect the battery’s talk and standby times.  
There is also an internal backup battery that saves all settings in  
the phone if the regular battery is discharged. An internal  
backup battery needs an initial charge of 24 hours.  
The internal battery maintains data for about four hours.  
Perform ActiveSync operations or a backup utility frequently  
to avoid loosing any information in case the battery is fully  
discharged.  
24  
Section 2: Understanding Your Phone  
 
Section 3: Call Functions  
Topics Covered  
Making a Call  
Answering a Call  
Using the Speakerphone  
Your Phone Number  
Call Log  
Roaming  
Voice Signal  
This section allows you to make or answer a call. It also  
includes the features and functionality associated with  
making or answering a call.  
Section 3: Call Functions  
25  
 
Roaming  
Missed - Displays any missed calls.  
Making a Call  
Outgoing - Displays all outgoing calls made from your phone.  
Incoming - Displays all the incoming comes that were answered.  
There are several ways to make calls on your new i830. You can  
use speed dial, voice dial, call history, or simply enter the  
desired number and tap  
.
By Caller - Allows you to select an entry from the contacts and then  
displays any call information related to the contact.  
Answering a Call  
If you tap the entry, the time, date, and duration of the call  
appears in the display.  
Make sure that the phone is turned on.  
When you receive an incoming call, the Phone Incoming screen is  
displayed. Tap Answer to answer the call or Ignore to silence the  
ringer and let the call go to voicemail.  
Roaming  
What is Roaming  
Your phone can roam on other digital networks. Roaming  
occurs when you travel outside a predesignated coverage area.  
Note: When you receive a call, you can silence the ringer by pressing  
.
The roaming icon appears on when in roaming is active, and  
extra charges may apply when making or receiving a call.  
Using the speakerphone  
The speakerphone allows you to speak to others without the  
need to hold the phone to your ear.  
Note: Some features may be unavailable while roaming. Roaming also  
consumes additional power from the battery requiring more frequent charges.  
Display Your Phone Number  
Roaming Options  
1. Tap Start, then select Phone from the drop down menu.  
The following roaming options are available:  
2. Tap Tools, then select Options.  
Home only - Your phone is available for normal operation only in the  
designated coverage area.  
3. The Settings screen is displayed as well as your phone  
number at the top of the screen.  
Automatic-A - The preferred roaming list is used to acquire service.  
If no preferred systems are found, any digital "A" system is acquired.  
4. Tap  
to exit.  
Automatic-B - The preferred roaming list is used to acquire service.  
If no preferred systems are found, any digital "B" system is acquired.  
Call History  
When a call is received, made, or missed a record of the call is  
saved with all the available information in Call History. The  
Call History logs are:  
Note: Contact your service provider for information regarding preferred  
systems.  
All Calls - Displays all call received, sent, or missed.  
26  
Section 3: Call Functions  
Section 3: Call Functions  
27  
 
To change your Roaming option, follow these steps:  
1. Tap Start, then select Phone from the drop down menu.  
2. Tap Tools, then select Options. The Settings screen is  
displayed.  
3. Tap Service, then select the Roaming option you want from  
the drop down menu.  
TTY  
Your i830 is fully TTY compatible. Connect TTY equipment to  
the headset jack, which is located on the left side of the phone.  
Voice Signal  
Voice Signal is advanced speech recognition software that can  
be used to activate a widevariety of functions on your Pocket  
PC. Voice Signal software automatically voice activates all  
numbers in your Contacts for voice dialing or searching, and  
no prerecording or training is needed.  
Voice Signal commands allow you to dial numbers, lookup  
contact information, and open applications using your voice.  
Simply say a command at the prompt to record memos, open  
your phone book, launch the browser, and more.  
GSM Services  
These menu items are supported only when you are operating  
on a GSM network.  
28  
Section 3: Call Functions  
 
Section 4: Menu Navigation  
Topics Covered  
Navigating the PDA  
Menu Types  
Launcher/Task Manager  
This section explains the menu navigation for your phone. It  
also includes an outline of all the available menus associated  
with your phone.  
Section 4: Menu Navigation  
29  
 
Launcher/Task Manager  
Navigating Your PDA  
Launcher/Task Manager  
Your i830 provides the power of a personal computer with  
exceptional portability and integration. Unlocking its power  
begins with customizing the i830 so that it becomes an  
extension of your desktop or laptop computer.  
The Launcher/Task Manager is a task and file launcher with  
great additional features. Programs, games, utilities, and files  
can all be launched from customized popup windows using  
your stylus or function keys located on your i830.  
The i830 is powered by Windows Mobile 2003 Software for  
Pocket PC, providing the power and familiarity of Microsoft  
Windows. Pocket versions of popular Microsoft applications  
Opening Launcher  
You can open the Launcher application two ways. Either press  
®
®
such as Word, Excel, Windows Media Player and Outlook  
the  
key on the i830, or follow the steps below to access the  
eliminate the need to learn new software.  
application using menu selection.  
1. Tap Start located in the upper left corner of the screen.  
Menu Types  
2. Tap Programs.  
The start menu contains links to all the applications and  
3. Tap Launcher. The Launcher pop-up window displays.  
settings information, similar to a Windows based PC system.  
To access the start menu, simply use the stylus to tap in the  
upper left corner of the screen on the word Start. A menu list is  
displayed, and from this pull down type menu, all other  
applications and settings can be accessed. There are two menus  
available in the i830 menu options. They are:  
Launcher Groups  
When you open the Launcher application, a Group window  
displays. Your phone has the following default popup  
windows for the Launcher application:  
MITs  
Start Menu  
Mobile Office  
Utilities  
New Menu  
The Start menu options allow you to configure what is  
displayed when you tap the Start menu located in the upper  
left corner of the screen.  
Games  
Control Panel  
The New menu options allow you to configure what is  
displayed when you tap on the New menu located in the  
bottom left corner of the screen.  
30  
Section 4: Menu Navigation  
Section 4: Menu Navigation  
31  
 
32  
Section 4: Menu Navigation  
 
Section 5: Entering Text  
Topics Covered  
Selecting Text Input Mode  
Block Recognizer  
Keyboard  
Letter Recognizer  
Transcriber  
This section outlines how to select the desired text input  
mode when entering characters into your phone. This section  
also describes the redictive text entry system that reduces the  
amount of key strokes associated with entering text.  
Section 5: Entering Text  
33  
 
Keyboard  
Selecting Text Input Mode  
Keyboard  
There are four different character input methods available.  
They are:  
This input method displays an onscreen keyboard that can be  
used to input characters by tapping the screen using the stylus.  
The keyboard entry method has the following options:  
Block Recognizer  
Large Keys  
Keyboard  
Small Keys  
Letter Recognizer  
Transcriber  
Use gestures for the following keys and remove them from the key-  
board.  
Each of these methods allow you to input alphanumeric  
characters and symbols into the i830. In addition to the input  
methods, there is Word Completion and other options  
associated with the input selected.  
To access the Input settings:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Settings.  
To select larger or smaller keys, simply tap the button next to  
the desired option.  
The gestures feature allows you to replace keys used on the  
keyboard for space, backspace, shift+key, and enter by drawing  
a gesture or motion. The large key option must be selected for  
this option to be available.  
3. Tap the Personal tab.  
Letter Recognizer  
4. Tap the Input icon.  
This option allows you to enter text using your own  
handwriting. The screen is divided into three different areas.  
A capitol letter area, small letter area, and a number area.  
Characters are entered by printing letters in each area. The  
character is then analyzed and typed on the screen  
automatically. The following options are associated with this  
method:  
Block Recognizer  
This input method uses the traditional writing area box split in  
the middle. The left side is used to write letters and the right  
side is for number entry. Symbols and common functions are  
located in other smaller boxes located to the right of the writing  
box area. There are no options associated with this type of  
input method.  
Quick stroke  
Right to left crossbar  
Allow accented characters  
34  
Section 5: Entering Text  
Section 5: Entering Text  
35  
 
Text Entering Options  
Add a space after suggested word.  
Replace text as you type.  
Transcriber  
The transcriber option is similar to the letter recognizer, except  
instead of entering characters into a designated area, you can  
enter entire words and sentences using your own handwriting.  
Transcriber supports both printing and cursive writing styles  
and then automatically types the information on the screen.  
The following general options are associated with this method:  
To select the desired number of letters or words, simply tap the  
drop down arrow associated with each option.  
Text Entering Options  
Sound On - Turns the sound On or Off.  
Note: The options settings only apply when writing or recording is supported.  
Show intro screen - Displays the help or introduction screen when-  
ever the transcriber option is selected.  
In the options tab, you can select:  
Show iconbar - Displays the iconbar.  
Default zoom level for writing  
Inking Color - Allows you to select the color and size of the stroke  
line.  
Default zoom level for typing  
Capitalize the first letter of a sentence  
Scroll upon reaching the last line  
There are also some transcriber recognizer options. They are:  
Add space after - Automatically adds a space after each writing.  
Separate letters mode  
Speed of recognition vs. Quality - Determines the speed at which  
the writing sample is analyzed. The faster the setting the less likely  
to get all words correct. Better quality is achieved with longer pro-  
cessing.  
Recognition start time - Allows you to set the time of recognition  
between new writings.  
Word Completion  
Word completion settings determine if words automatically  
display after entering a defined number of characters on the  
screen. The following options are available:  
Suggest words when entering text  
Suggest after entering (1-7) letters.  
Suggest (1-4) word(s).  
36  
Section 5: Entering Text  
Section 5: Entering Text  
37  
 
38  
Section 5: Entering Text  
 
Section 6: Contacts  
Topics Covered  
Understanding Your Contacts  
Adding Notes to Contacts  
Speed Dialing Contacts  
This section allows you to manage your daily contacts by  
storing their name and number in your phonebook. These  
entries can then be sorted by name, entry, or group.  
A large number of entries can also be stored on the SIM card.  
The exact number depends upon the SIM card type. Each  
entry in the Contacts can have up to five associated numbers  
and two email addresses. Each phone number can be up to  
32 digits long, including hard pauses, while associated names  
and email addresses can be up to sixteen characters long.  
The memory (speed dial) location of your choice for each  
entry can also be specified. Memory locations can be marked  
secret to prevent unauthorized viewing.  
Section 6: Contacts  
39  
 
Understanding Your Contacts  
In addition to the information available in contacts, you can  
also record or write a note associated with the contact. All of  
this information can be synchronized with a PC or Laptop  
using the Microsoft ActiveSync application.  
Understanding Your Contacts  
The Contacts feature is used to save important information  
regarding your friends, colleagues, or business acquaintances.  
The contacts screen allows you to save the persons:  
Add a new contact  
Name  
Assistant Telephone  
Birthday  
1. Tap Start located in the upper left corner of the screen and  
select Contacts.  
Job Title  
Department  
Company  
Anniversary  
Spouse  
Note: You can also press the Contacts button  
located in the front on the  
lower left corner of the i830.  
Work Telephone, Fax, &  
Address  
Children  
2. Tap New.  
E-mail  
3. Enter the desired information in the spaces provided. When  
finished, tap  
.
Mobile Telephone  
Web page  
Find a contact  
Office Location  
Home Telephone & Address  
Categories  
If you have stored a name entry to your Phonebook or SIM  
card, Find allows you to locate it quickly.  
1. By Name :Search the Phonebook alphabetically by name.  
Enter the name of the person as they are entered in your  
Phonebook (last name first, etc.).  
Other Addresses  
Pager  
Car Telephone  
Home Fax  
2. By Entry: Search the Phonebook by entry number.This is the  
same number assigned to Speed dial (002, 003, etc.).  
Work2 and Home2 Telephone  
E-mail2 and E-mail3  
Assistant  
3. By Group: Search the Phonebook by selecting from one of the  
five available groups. This option only works if you’ve added  
entries to one of the groups.  
4. SIM Only: Search for entries on the SIM card (only).  
40  
Section 6: Contacts  
Section 6: Contacts  
41  
 
Adding Notes to Contacts  
5. When the contact has been successfully transferred, tap  
Delete a contact  
to exit.  
Delete All (in CDMA mode) allows the deletion of all entries in  
your Contacts but not those on your SIM card.  
Adding Notes to Contacts  
Notes allow you to record or write a note that is attached and  
saved with the contact entry. When you view the summary  
screen on the contact, you can view or listen to any notes that  
are associated with the contact.  
Make a call from contacts  
To make a call from the contacts screen:  
1. Press  
to open Contacts.  
Adding a note  
2. Tap the desired contact from the list.  
1. Press  
to open Contacts.  
3. From the summary screen, tap the phone number.  
2. Tap the desired contact from the list.  
3. Tap the Notes tab.  
4. The call is dialed automatically. To end the call, tap the End  
button in the Phone-Connected screen.  
4. To record a note, tap record icon  
located in the  
Memory Info  
command bar. Tap  
when finished.  
to begin the voice recording. Tap  
Memory Info displays the Total, Used, Reserved, and Free  
memory for the Phonebook and SIM Memory.  
5. To write a note, tap the pen icon  
and enter the note  
using the desired entry method.  
Note: Reserved memory is only available in the Phonebook and doesn’t  
appear under SIM Memory  
6. To exit and save, tap  
.
Deleting a note  
.Beam a contact via IR  
To delete a note:  
1. Press  
to open Contacts.  
Your i830 is equipped with an infrared port (IR) which allows  
you to send and receive information wirelessly between two IR  
Pocket PC devices. To beam a contact:  
2. Tap the desired contact from the list.  
3. Tap the Notes tab.  
1. Press  
to open Contacts.  
4. Tap Edit and select Select All.  
5. Tap Edit and select Clear.  
2. Tap the desired contact from the list to view the summary  
screen.  
6. To exit and save, tap  
.
3. Tap Tools and select Beam Contacts.  
4. Align the ports between the two devices.  
42  
Section 6: Contacts  
Section 6: Contacts  
43  
 
Speed Dial Contacts  
Speed dial can be used to the dial contacts that you talk to the  
most. Speed dial allows you to press either one or two keys to  
dial to the contact. Memory locations 299 are available for  
speed dialing. To speed dial:  
1. Tap  
.
2. Tap New in the bottom left corner of the screen.  
3. Tap the contact that you wish to add to Speed Dial.  
4. Tap the up or down arrows next to Location: to select the  
desired memory location.  
5. Tap  
to save.  
6. To exit the contact summary screen, tap  
again.  
44  
Section 6: Contacts  
 
Section 7: Messaging  
Topics Covered  
Types of Messages  
Messaging Inbox  
Text Messages  
About E-mail Setup  
E-mail Using Active Sync  
E-mail Using ISP  
This section allows you to send or receive different types of  
messages. It also includes the features and functionality  
associated with messaging.  
Section 7: Messaging  
45  
 
Messaging  
Create and send a text message  
Types of Messages  
1. From the phone screen, tap Tools and select Send Text  
The i830 is capable of sending email and text messages. To  
send email using ActiveSync, you’ll first need to install  
ActiveSync to your PC, and then create a Standard Partnership.  
To send email direct, configure the i830 to connect with your  
existing Internet Service Providers POP3 server. Send text  
messages by simply entering the phone number of the recipient  
in the To: <....> field of the message composer when creating a  
new message.  
Message.  
2. Enter the phone number(s) of up to ten recipient(s) in the To:  
field. Place a semicolon between numbers, if more than one.  
3. Tap the Subj: field and enter a title for the message.  
4. Tap the message area and enter a message using the desired  
method of input. When finished, tap the double drop down  
arrows to the right of the Subj: field.  
5. Tap the drop down arrow next to Account and make sure that  
Messaging Inbox  
Text Messages is selected.  
All incoming messages arrive and are stored in the Inbox until  
deleted. If memory is full, new messages are rejected. Delete  
older messages to free up space for incoming messages. The  
Inbox has three sub menus at the bottom of the screen labeled  
New, Tools, and Accounts. The following sections cover each of  
these sub menus in more detail.  
6. If you would like a delivery confirmation that the message was  
delivered, tap Tools and select Options. Tap the check box  
next to Request message delivery notification.  
7. Tap Send to send the message.  
Note: There is a 160-character limit for text messages. The limit applies only to  
messages sent using Text Messaging and not Pocket Outlook or other E-mail  
clients. If you send an SMS message with more than 160 characters, the  
message truncates after the first 160 characters. Remaining characters are sent  
in separate messages until all characters have been sent. Charges apply in  
accordance with the sender’s and the recipient’s calling plans.  
Messaging Outbox  
Your phone stores messages in the Outbox, regardless of  
whether the message was successfully transmitted. Verify if  
and when a message or email was successfully transmitted by  
enabling the Delivery Ack feature.  
Messaging  
Note: Delivery Ack may not be available on all GSM networks and when  
roaming off the Verizon Wireless Network.  
Voice mail allows callers to leave voice messages, which can be  
retrieved any time. The procedure for checking voice mail  
varies, depending upon the mode of operation (GSM or  
CDMA). Once your voice mail account has been set up, you can  
use the SMS Inbox folder (under the Message menu) to view  
details of voice messages in your voice mailbox.  
Text Messages  
You can send and receive text messages to other users with  
SMS capability. Text messaging, also known as SMS (Short  
Message Service) can be sent from one device to another by  
addressing the message to the recipients phone number.  
46  
Section 7: Messaging  
Section 7: Messaging  
47  
 
About E-mail setup  
Callback # : Use Callback # to view or modify the callback #.  
The Callback# can be inserted into all outgoing messages,  
thereby notifying the recipient(s) of your phone number.  
Message Setting  
The Msg Setting sub menu allows you to define default settings  
for all message types.  
Auto Delete: Use Auto Delete to set the disposal method of  
messages after they are read.  
1. Text Msg Setting  
Quick Text :View and edit any of the pre-composed messages  
in your Quick Text list.  
Voice Mail #: Use Voice Mail # to view or modify your voice  
mail number.  
Save In Outbox: Set the default method for saving (or not  
saving) messages to your Outbox.  
GSM setting: GSM Setting can only be accessed and modified  
while in GSM (Int°Øl) mode.  
Insert Signature: Insert a signature into all outgoing text  
messages. You also have the option to create a signature.  
About E-mail setup  
Auto Play: Set media within messages to automatically play  
upon reception, or prompt before playing.  
Email can be sent and received using ActiveSync, or you can  
also configure the i830 to send email using an ISP account.  
Direct View: Turn Direct View on or off. Direct View  
immediately displays the content of a message as it is  
received.  
Note: For wireless sync e-mail, refer to Wireless Sync on the Companion CD  
included in your Gift Box.  
2. Pix Msg Setting  
Quick Text :View and edit any of the pre-composed  
messages in your Quick Text list.  
E-mail using ActiveSync  
Save In Outbox: Set the default method for saving (or  
not saving) messages to your Outbox.  
Install ActiveSync on your PC and set up a Standard  
Partnership, so you can send/receive email. See ʺSetup a  
partnershipʺ on page 72 in the ActiveSync chapter. Email is  
composed offline and is sent to the intended recipient(s) the  
next time you perform ActiveSync.  
Delivery Ack:Set your phone to alert you when messages are  
delivered (delivery acknowledgement may not be available on  
all networks).  
1. Tap Start, and then select Inbox.  
Retrieval Mode: Set your phone to retrieve (download) a Pix  
Msg automatically or prompt you for retrieval.  
2. Tap New and enter the e-mail address in the To: field.  
3. Tap the Subj: field and enter a subject.  
Text Entry Mode : Use Entry Mode to select the default method  
of text entry.  
4. Tap anywhere in the message body field and enter the content  
of your e-mail.  
5. When you’re finished, tap Send. When you synchronize your  
i830 with your PC, the message is sent through your PC’s  
email client.  
48  
Section 7: Messaging  
Section 7: Messaging  
49  
 
E-mail using an ISP  
ActiveSync Message Folders  
Setup an ISP  
There are five message folders in the ActiveSync directory.  
Each folder and its related function is listed below:  
Before you can send email directly, you’ll need to configure the  
i830 to work through an existing account with an Internet  
Service Provider (ISP) or your network at work. To configure  
the i830 to work with an ISP:  
Deleted Items: Deleted e-mail is sent to the Deleted Items folder.  
Once e-mail are removed from the Deleted Items folder, they are  
permanently erased.  
1. Tap Start, and the select Settings.  
Drafts: Drafts contain all e-mail messages that were not completed  
and saved to be sent at a later date.  
2. Tap the Connections tab.  
3. Tap the Connections icon, and select Add a new modem  
Inbox: All incoming e-mail arrives and is stored in the Inbox until  
deleted. If memory is full, new messages are rejected. Delete older  
messages to free up space for incoming messages.  
connection.  
4. Enter a name of the connection, and select Cellular Line under  
Select a modem, then tap Next.  
Outbox: When you send an e-mail, it is stored in the Outbox until  
you ActiveSync with your PC.  
5. Enter the dial-up number for your ISP, then tap Next.  
6. Enter the User name and Password for your account.  
7. Tap Domain and enter the domain name for your account.  
8. Tap Finish.  
Sent Items: Sent Items keeps a record of all sent e-mail from your  
device.  
Access ActiveSync Message Folders  
1. Tap Start in the upper left corner of the screen, then tap Inbox.  
2. Tap the drop down arrow to the right of Inbox. A directory of  
3. folders for Activesync and SMS messages appears in the  
display.  
4. Tap the + sign to the left of ActiveSync to display the  
ActiveSync folder hierarchy (if necessary).  
5. Tap any of the folders with the ActiveSync directory to view the  
folder’s contents.  
E-mail using an ISP  
If you’ve configured the i830 to send email using an Internet  
Service Provider (ISP), you can send email directly from the  
i830 without connecting to your PC through ActiveSync.  
50  
Section 7: Messaging  
Section 7: Messaging  
51  
 
52  
Section 7: Messaging  
 
Section 8: Changing Your Settings  
Topics Covered  
i830 Settings  
Button Settings  
Sound Settings  
Password Settings  
Phone Settings  
This section explains how to enable or change the settings for  
your phone.  
Section 8: Changing Your Settings  
53  
 
Sound Settings  
i830 Settings  
Sound Settings  
The Settings menus for your i830 allow you to configure or  
change how many of your phones features or functions appear  
or work. Some of the settings on these menus are associated  
with shortcuts or hotkeys on your phone and can be quickly  
accessed for your convenience.  
PDA/Phone Ringer Volume  
You can set the volume for both PDA notifications such as  
tapping your screen or alarms and the incoming ringer volume.  
To adjust these volumes, follow these steps:  
1. Tap the  
icon located at the top  
For example, the Today Screen has shortcuts for Owner  
Information and Bluetooth connections, while the Launcher  
of your screen. A menu displays  
with sliders to adjust both the PDA  
and ringer volumes.  
Application, accessed by pressing the  
key, displays  
shortcuts for Power and Screen settings. Accordingly, somce  
Settings available on the Personal, System, and Connections  
tabs are discussed features are presented in this manual.  
2. Using the stylus, tap the desired  
level on the slider located under  
Volume. The left slider controls the  
PDA volume and the right slider  
controls the ringer volume.  
Settings that are not easily associated with other applications or  
features of your phone are discussed here. They are not listed  
in a specific order; however, some settings are grouped with  
topics that include them.  
3. Tap the  
icon again to exit.  
If you don’t see a setting that your looking for discussed here,  
check the Index, which begins on page 184, for a complete  
listing of all settings for your phone.  
WOW XT Audio Processing  
WOW(tm) significantly enhances the quality of mono and  
stereo audio, creating improved dynamics and bass  
performance in your i830 internal speakers or optional  
headphones when attached. WOW provides a panoramic  
threedimensional audio image that extends the sound in both  
the horizontal and vertical planes well beyond the speakers or  
headphones themselves. These enriching effects are especially  
noticeable on digitally compressed audio formats such as MP3  
and WMA.  
Buttons Settings  
The Buttons setting allows you to assign your favorite  
programs to your phones hardware buttons:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Settings, then tap the Personal tab.  
3. Tap the Buttons icon.  
®
®
®
WOW is comprised of SRS , TruBass and Focus  
4. Tap the Button assignment drop down box for each of the  
technologies, and adds the following features to your audio  
listening experience.  
buttons listed below.  
5. Tap  
to save and exit Buttons settings.  
54  
Section 8: Changing Your Settings  
Section 8: Changing Your Settings  
55  
 
Password Setting  
Turn volume off  
SRS - the leading 3D sound technology in the world, which restores  
the spatial information that is masked by traditional recording and  
playback techniques.  
You can turn the ringer off, or you can select one of the other  
Ring tone options, such as Vibrate, Vibrate and ring, or Vibrate  
then ring.  
TruBass - SRS technology that enhances bass performance by uti-  
lizing psychoacoustic techniques to restore the perception of low fre-  
quency tones, delivering deep rich bass to your i830 internal  
speakers or optional headphones.  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Settings, then tap the Personal tab.  
3. Tap Phone.  
Focus - Elevates the sound image field to create the perception of  
image height. When used in combination with SRS 3D, it delivers an  
enlarged sound image while improving the clarity in the high fre-  
quencies in your audio.  
4. Tap the drop down arrow next to Ring type and select one of  
the Vibrate options or select None.  
5. Tap  
to exit.  
CarKit Volume  
Password Setting  
The CarKit Volume determines the volume settings for voice  
and PDA ringers when your i830 is attached to the optional  
handsfree kit installed in a vehicle.  
Volume settings range from Silent to Loud. To set each option  
for the optional CarKit, follow these steps:  
The password option allows you to enable or disable a  
password. The available settings are:  
Simple 4-digit password - Allows you to set a four digit password  
using the on-screen keypad.  
Strong alphanumeric password - Allows you to enter a password  
that contains letters, numbers, or both.  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Settings.  
When a password is configured, there is a ʺprompt if device  
unusedʺ option that allows a length of time range from 0  
minutes 24 hours. When this option is set, you can continue to  
use the i830 until the screen turns off due to inactivity. If the  
device is inactive for a greater amount of time than specified in  
this setting, a password must be entered when you turn the  
device back on.  
3. Tap the System tab.  
4. Tap CarKit Volume.  
5. Using the stylus, tap the desired level on the slider for each of  
the volume settings available.  
6. Tap  
to save your settings and exit.  
Sounds and Notifications  
Phone Settings  
The Sounds and Notifications settings allows you to select the  
actions for which you hear sounds and to customize how you  
notified when different events occur.  
Phone options are divided into the following tabs:  
Phone - Use Phone Mode to set your phone for the operational  
mode of Verizon (CDMA) or Int’l (GSM).  
Option - Allows you to configure the SMS Call Back Number, as  
well as the Answer options for your phone.  
56  
Section 8: Changing Your Settings  
Section 8: Changing Your Settings  
57  
 
Alert - Allows you to turn on or off the Minute beep, Connect tone,  
or Disconnect tone.  
Service - Allows you to set the Data Mode and Roaming Options.  
Select the Hybrid Mode, GPS setting, and your Voice privacy level.  
Security - Allows you to restore the factory default settings for your  
phone. Set Emergency Call numbers. Change NAM Mode. Display  
the current hardware and software version of the i830.  
Phone Tab  
These options allow you to configure several different settings  
that are specific to the phone including:  
Changing the Voicemail Dialup Number  
System Sounds  
Keypad Tones  
Voice Privacy Notification  
Phone Ringer Options  
You can select several different phone ringer sounds for the  
i830. You can also change the ring type and its tone, as well as  
set an alert for when voice privacy is not available. To access  
these settings:  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Settings.  
3. Tap the Personal tab.  
4. Tap the Phone icon.  
5. Tap the Phone tab.  
58  
Section 8: Changing Your Settings  
 
Section 9: Personal Digital Assistant  
Topics Covered  
Your Personal Digital Assitant  
Picsel Browser  
Microsoft Pocket Applications  
Sprite Backup Utility  
Application Management  
Memory Adjustments  
This section introduces you to many of the applications  
included with your phone. You can view most documents  
with the document viewing tool, and you have access to  
word processing, speadsheet, and instant messaging  
software preloaded on your phone and ready to use.  
Section 9: Personal Digital Assistant  
59  
 
Microsoft Pocket Applications  
Your Personal Digital Assistant  
Microsoft Pocket Applications  
The i830 is an integrated communication device with the power  
of a mobile phone and the intelligence of a Personal Digital  
MSN Messenger  
®
®
Log onto Microsoft MSN Messenger and chat with others  
right from your i830. Using your Internet connection, you can  
quickly send instant messages to your list of online buddies, or  
interact with several people at the same time. The chat window  
lets you read and write messages, and notifications alert you if  
others are trying to get in touch. ʺMy Textʺ lets you store and  
recall frequently used messages so you can respond without  
composing a reply.  
Assistant. The i830 is loaded with familiar Microsoft pocket  
applications, like Pocket Outlook, Pocket Internet Explorer,  
®
®
MSN Messenger, Windows MediaTM Player 9 for Pocket PC,  
®
and ActiveSync . You don’t have to learn new software to use  
all the phones features.  
Picsel Browser  
Picsel Browser allows you to view documents on your handset  
without any file conversion or loss of content. The document  
display environment brings new levels of satisfaction to your  
browsing and document viewing experience by supporting  
popular file formats from your desktop environment in their  
native form without any conversion.  
The interface also allows you to navigate your documents by  
simply touching your stylus to the screen, and then panning  
documents or zooming in or out to view every detail of your  
documents.  
MSN Messenger is a MSN Passport service and requires a  
®
Passport, Hotmail , or MSN account.  
Pocket Internet Explorer  
You can use Internet Explorer to view web pages on your i830  
in two different ways:  
By downloading pages and then performing an ActiveSync opera-  
tion.  
By connecting to the Internet Directly.  
While browsing you can also download new files and  
programs. If you are using Microsoft Internet Explorer version  
4 or later, your favorites can be synchronized to your i830.  
Launching the Picsel Browser  
To launch the Picsel Browser, follow these steps:  
1. Tap Start located in the upper left corner of the screen.  
2. Select Programs.  
Pocket Word  
Pocket Word works with Microsoft Word on your computer to  
give you easy access to copies of your documents. You can  
create new documents or copy documents from your computer  
to your i830. Synchronize the documents between your  
computer and your i830 to insure you have the most uptodate  
content in both locations.  
3. Tap Picsel Browser. The browser displays.  
4. To view the main menu, tap on the Picsel logo in the lower  
right of your screen to display the program’s carousel.  
5. Choose the function you want by selecting the appropriate  
icon.  
Use Pocket Word to create documents, such as letters, meeting  
minutes, and trip reports.  
60  
Section 9: Personal Digital Assistant  
Section 9: Personal Digital Assistant  
61  
 
Memory Adjustments  
1. Insert the CD into the desktop/laptop PC.  
2. Run the Setup program.  
Pocket Excel  
Pocket Excel works with Microsoft Excel on your computer to  
give you easy access to copies of your workbooks. You can  
create new workbooks or copy workbooks from your computer  
to your i830. Synchronize workbooks between your computer  
and your i830 to insure that you have the most uptodate  
content in both locations. Pocket Excel also provides  
fundamental spreadsheet tools, such as formulas, functions,  
sorting, and filtering.  
3. Connect your i830 to your computer.  
4. Perform the ActiveSync operation.  
Delete an application  
Some applications are large and take up space on your i830. To  
help manage space and memory requirements for other  
software that may need to be installed, you can delete any  
application not required for your device to operate correctly. To  
delete an application:  
Sprite Backup Utility  
Sprite Backup helps you protect the data on your Pocket PC  
from data loss due to hardware failure, drained battery or  
accidental deletion. Use Sprite Backup to create a backup copy  
of your Pocket PCs data to a safe location. If data on your  
Pocket PC is accidentally erased or overwritten or the battery  
time expires, you can easily restore the data from a backup  
copy.  
1. Tap Start located in the upper left corner of the screen.  
2. Select Settings.  
3. Tap the System tab.  
4. Tap Remove Programs at the bottom of the screen.  
5. Select the program from the list and tap Remove.  
Memory Adjustments  
Application Management  
Memory is managed automatically, but can be adjusted using  
the memory slider. Memory is allocated to storage and  
programs. Usually the amount given to each is divided into  
equal amounts. It may become necessary to adjust one or the  
other in order to install or use an application requiring higher  
memory usage.  
Your i830 is powered by Windows Mobile(tm) 2003 Software  
for Pocket PC Phone Edition, which allows installation and  
removal any Pocket PC 2003 compatible application on your  
device. Pocket PC applications can be downloaded from the  
web, purchased at retail outlets, or beamed from a friend using  
the IR feature.  
Install new applications  
When a new application is downloaded from the web or  
installed using a CD, the files are transferred to the mobile  
device via ActiveSync. ActiveSync checks if enough memory is  
available before installing a program. To free up memory,  
simply remove old programs or delete unused files.  
62  
Section 9: Personal Digital Assistant  
Section 9: Personal Digital Assistant  
63  
 
64  
Section 9: Personal Digital Assistant  
 
Section 10: Personal Organizer  
Topics Covered  
Calendar  
Today Screen  
Task List  
New Command  
Notes  
Alarm  
Calculator  
Active Sync  
The topics covered in thsi section allow you to schedule  
appointments, view the calendar, create Task lists, set an  
alarm, perform simple math calculations, and setup up your  
phone so you can sychronize your files and folders with your  
desktop PC.  
Section 10: Personal Organizer  
65  
 
Today Screen  
Calendar  
Today Screen  
The calendar allows you to create appointments and reminders  
for the day, week, month, or year.  
The Today screen is used as a default information screen on the  
Pocket PC. When the i830 is turned on, the Today screen is  
displayed. The today screen displays the following information  
on the screen:  
Schedule an appointment  
Current Date and Time  
Owner Information  
Message Status  
An entry in the calendar is called an appointment or reminder.  
When you schedule something, a description is displayed on  
the time line, and the duration is set to 1 hour by default. You  
can easily change the start time and duration for any event.  
Current Tasks  
Current Appointments  
Bluetooth Status  
Schedule a timed appointment  
You can schedule timed appointments for the current date or  
for future dates.  
Date and time settings  
Clock settings can be accessed from the Today screen by  
tapping the clock icon next to the day and date entry on the  
screen. Clock settings allow you to set the time zone, time, and  
date for your home or visiting location.  
Change the Calendar view  
When you open the calendar, you can change the view to one of  
the following:  
Appointments - Displays a list of the current days appointments.  
Day - Displays the day with times and any appointments.  
Week - Displays the week.  
Owner Information  
Owner Information is where you can store information on the  
owner or user of the device. Name, company, address,  
telephone, email, and note information fields are available.  
Month - Displays the month.  
Year - Displays the year.  
Message/Task Status  
Calendar Options  
The Today screen displays the status messages you have  
received and of the next or current task scheduled. You can  
view you Inbox or the Task List by tapping on the status lines.  
For more information about the Inbox, see ʺMessaging Inboxʺ  
on page 46 and for more information about your managing  
tasks, see ʺTasks Listʺ on page 68.  
Calendar Options allow you to select what day of the week  
your calendar starts upon, whether you view a 5day, 6day, or  
7day week, options for reminders, and more.  
66  
Section 10: Personal Organizer  
Section 10: Personal Organizer  
67  
 
New Command  
Current Appointments  
New Command  
To view the next upcoming appointment and battery indicator  
without launching the calendar or today screen:  
The New command located in the bottom left side of the screen  
allows you to create a new:  
1. Tap the time in the upper right corner of the screen.  
Appointment  
2. The Time and Next Appointment screen is displayed.  
Contact  
Excel Workbook  
Message  
Bluetooth Status  
The Bluetooth Status indicators on the Today screen let you  
know if Bluetooth is turned on. The profile icons indicate when  
one of the Bluetooth connections is active. When Bluetooth is  
Note  
Task  
Off the Bluetooth icon  
is grayed out.  
Word Document  
If you tap the Bluetooth icon, the icon appears blue  
and  
To access the New command:  
On displays next to the profile icons. When a profile is active,  
its icon is highlighted, which indicates that data is being  
exchanged between your phone and another Bluetooth device.  
1. Tap New located in the bottom left corner of the screen.  
2. Select any of the choices to launch the application.  
Notes  
Tasks List  
Quickly capture thoughts, reminders, ideas, drawings, and  
phone numbers with Notes. Notes can be attached to contacts,  
appointments, messages, and tasks. Notes can be either  
recorded or written.  
A task is something that needs to be done in a certain amount  
of time and requires a reminder once the deadline has been  
reached. Once a task is complete, it can be checked off and  
another task can be started. A task list can be set up to keep  
track of tasks. Tasks can also be prioritized, so that higher  
priority items are finished first.  
When the task is saved, it is added to the task list. The task list  
allows you to sort the tasks based on priority level, subject,  
start date, due date, or status.  
Tstart or end times. To enter any additional information you  
need to edit the task.  
3. Select Tasks.  
4. Select the desired task from the task list.  
5. Tap Tools and select Delete Task.  
68  
Section 10: Personal Organizer  
Section 10: Personal Organizer  
69  
 
ActiveSync®  
®
Alarm  
ActiveSync  
Schedule an alarm  
Microsoft ActiveSync synchronizes data between your PC and  
the i830. ActiveSync is already installed on the i830, but needs  
to be installed on your PC before you can synchronize data.  
Your phone has four alarm clocks that can be configured to ring  
daily at a desired time. To set up the alarm clock:  
System requirements  
1. From the Today screen, tap the clock icon  
.
Your computer needs the following software and hardware to  
use ActiveSync:  
2. Tap the Alarms tab.  
3. Tap the box next to the desired alarm.  
4. Tap the day of the week.  
Microsoft Windows XP, Windows 2000, Windows Millennium Edi-  
tion, Windows NT Workstation 4.0 with SP6 or later.  
5. Tap the time to display the time settings. Tap the up or down  
Microsoft Internet Explorer 4.01 SP1 or later  
arrows to select the desired time.  
Hard-disk drive with 12 to 65 MB of available hard-disk space  
(actual requirements will vary based on selection of features and  
user’s current system configuration)  
6. Tap  
when finished, and then tap  
again to save and  
exit.  
Infrared port or USB port (available for Windows 98, Windows Me,  
Windows 2000, and Windows XP only)  
Calculator  
The calculator allows you to perform general mathematical  
functions, such as addition, subtraction, multiplication, and  
division. You can use the calculator to perform basic  
calculations, store and retrieve values, and display the last  
series of calculations.  
A CD-ROM drive  
VGA graphics card or compatible video graphics adapter at 256  
color or later  
Install ActiveSync  
Using the calculator  
1. Place the CD in the drive and wait for the Installation window  
1. Tap Start located in the upper left corner of the screen.  
2. Select Calculator.  
to appear in the display.  
2. Select the Start Here tab.  
3. Tap the numbers and functions you want.  
3. Click the Install ActiveSync 3.7 menu selection.  
4. Click Install and follow the onscreen instructions.  
4. When finished adding the note, tap  
to save and exit.  
70  
Section 10: Personal Organizer  
Section 10: Personal Organizer  
71  
 
Install ActiveSync  
Connect the cradle  
ActiveSync via IR  
1. Connect the USB connector from the i830 cradle to an  
If you need to use ActiveSync and don’t have a cable, you can  
use the IR port.  
available USB port on your PC.  
2. Plug the AC adapter for the cradle into a standard 120 VAC  
1. On the PC, launch the ActiveSync application.  
wall outlet.  
2. Click File and select Connection Settings.  
3. Insert the i830 into the cradle, bottom end first. ActiveSync  
3. Click the check box next to Allow serial cable or infrared  
detects the i830 and you’re prompted to setup a partnership.  
connection to this COM port.  
4. Click the drop down arrow and select Infrared Port (IR).  
Setup a partnership  
5. Click OK to close the window.  
After you’ve installed ActiveSync and the necessary drivers,  
connected the desktop cradle to your PC, and inserted the i830  
into the cradle, you’re prompted to setup a partnership. There  
are two types of partnerships Standard Partnership and Guest  
Partnership.  
6. On the i830, tap Start located in the upper left corner of the  
screen.  
7. Tap ActiveSync.  
8. Tap Tools and select Connect via IR.  
9. Aim the two devices at one another.  
A Standard Partnership synchronizes data between your i830 and  
PC. Synchronization ensures that all relevant data is updated, and is  
the best method for using your i830 along with your PC to keep files  
up to date and stay connected.  
A Guest Partnership simply transfers files between your i830 and  
PC.  
4. Select the desired partnership and click Next.  
5. Select how you want to synchronize data and click Next.  
6. Enter a unique name for your device and click Next.  
7. Select or deselect the desired applications that you wish to  
synchronize, then click Next.  
8. Click Finish.  
The i830 and the PC should perform the first ActiveSync. This  
may take some time, depending on the amount of information  
that needs to be synchronized.  
72  
Section 10: Personal Organizer  
Section 10: Personal Organizer  
73  
 
74  
Section 10: Personal Organizer  
 
Section 11: Network Services  
Topics Covered  
Call Forwarding  
Call Waiting  
Caller ID  
This section allows set up the network functions supported  
by your carrier. Some of these services may not be available  
due to coverage area or service plans. If you have any  
questions, please contact the Customer Support center.  
Section 11: Network Services  
75  
 
Call Forwarding  
Call Forwarding allows you to forward all your incoming calls  
to another phone number, even when your phone is turned off.  
Three-way Calling  
Three way calling allows you to talk to two different people at  
the same time. When using this feature, normal airtime rates  
apply for each of the two calls.  
If one of the people you called hangs up, you and the  
remaining caller stay connected. If you initiated the call and are  
the first one to hang up, all three calls are disconnected.  
Call Waiting  
You can answer an incoming call while on an existing call. If  
you are on an existing call and another call is received, a tone is  
heard and a call waiting message is displayed on the screen. If  
the caller is stored in the address book, their name is also  
displayed.  
Caller ID  
Caller ID alerts you to whos calling by displaying the phone  
number of the person calling when you receive an incoming  
call. Similarly, if you call someone who has this feature, your  
phone number displays on their phone. If the callers name and  
number are already stored in your Internal Phone Book, the  
corresponding name appears with the number.  
76  
Section 11: Network Services  
 
Section 12: Bluetooth  
Topics Covered  
About Bluetooth  
Bluetooth Modes  
Turning Bluetooth On/Off  
Making Your 830 Discoverable  
Bluetooth Bonds  
Beaming Using Bluetooth  
Bluetooth Profiles  
This section explains theBluetooth feature available with  
your phone, as well as the types of connections and how  
information is shared between compatible devices.  
Section 12: Bluetooth  
77  
 
Turning Bluetooth On/Off  
In this mode, other devices can detect your i830, even if a bond  
hasn’t been established; however, to receive a beam from  
another device, you must accept the incoming beam on your  
i830. See Receiving a Bluetooth Beam for more information.  
About Bluetooth  
Bluetooth is a shortrange wireless communications technology  
capable of exchanging information over a distance of about 30  
feet without requiring a physical connection. Unlike infrared,  
you don’t need to line up the devices to beam information with  
Bluetooth.  
If the devices are within a range of one another, you can  
exchange information between them,even if they are located in  
different rooms. Your Pocket PC allows you to beam files,  
appointments, tasks, and contact cards between devices that  
have Bluetooth capabilities or you can create a dialup  
connection between your device and a Bluetooth phone. You  
can then use the Bluetooth phone as a modem.  
Turning Bluetooth On/Off  
1. Tap Start in the upper right hand portion of your screen.  
2. Tap Settings, and then select the Connections tab.  
3. Tap Bluetooth.  
4. Select or clear the "Turn on Bluetooth" check box. The  
Bluetooth radio is turned on or off depending on your  
selection.  
Note: By default the Bluetooth radio is turned off. If you turn Bluetooth on and  
then turn off the i830, you will also turn off the Bluetooth radio. When you turn  
your i830 back on, Bluetooth also turns on automatically.  
Bluetooth Modes  
Bluetooth operates in two modes:  
On/Off Mode  
Making your i830 Discoverable  
When the Bluetooth radio is turned on, you can use the  
Bluetooth features available in the i830. When the Bluetooth  
radio is turned off, you cannot send or receive information via  
Bluetooth. To save battery life or in situations where radio use  
is prohibited, such as airline traveling, you can turn off  
Bluetooth in your i830.  
1. Tap Start in the upper right hand portion of your screen.  
2. Tap Settings, and then select the Connections tab.  
3. Tap Bluetooth.  
4. Select the "Turn on Bluetooth" check box, and then select the  
"Make this device discoverable to other devices" check box.  
Discoverable  
Other Bluetooth devices can now detect your device and  
attempt to beam information to it, establish a connection, or  
use a Bluetooth service.  
The Discoverable mode is when Bluetooth is set to on in your  
i830, and all other Bluetooth devices are within range and can  
detect your device and beam information to it, establish a bond  
to your phone, or use another Bluetooth service.  
Note: If you do not want your i830 to be discoverable, clear the "Make this  
device discoverable to other devices" check box.  
78  
Section 12: Bluetooth  
Section 12: Bluetooth  
79  
 
Bluetooth Bonds  
A bond is a relationship that you create between your Pocket  
PC and another Bluetooth device to exchange information in a  
secure manner. Creating a bond involves entering the same  
PIN on the two devices sharing a bond. Once a bond is created  
between devices, the devices do not have to be discoverable to  
exchange information; however, each device must have its  
Bluetooth radio on.  
Bonds are created only once between devices. Once a bond is  
created, devices can exchange information as soon the bond is  
recognized, eliminating the need to discover one another or to  
enter security features like a common PIN.  
Beaming Using Bluetooth  
It is possible to exchange information using Bluetooth instead  
of infrared beaming, eliminating the need for the devices  
sharing information to be within ʺlineofsiteʺ of each other.  
80  
Section 12: Bluetooth  
 
Section 13: Accessories and Games  
Topics Covered  
Accessories  
Games  
This section outlines the available gaming options and  
accessories for your phone. For more information, contact  
your service provider.  
Section 13: Accessories and Games  
81  
 
Jawbreaker_i830  
Acessories  
Games  
Your i830 supports many accessories that make your phone  
truly unique. You can use your phone as a remote control for  
other electronic devices, such as a TV or VCR, or you can add  
an optional Hands Free Kit to allow you to operate your phone  
while you drive, and your phone has a builtin infrared (IR)  
port to allow you to transmit files, contacts, or download  
information from other capatible devices.  
Jawbreaker_i830  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Programs.  
3. Tap Games, then select Jawbreaker.  
4. Tap New and then select New Game to begin play.  
5. Tap Game and then tap Options to display the options screen  
Remote Control  
for the game.  
6. Change the options you want and then press  
to return to  
The Remote Control software is a Universal Remote Control  
Program with a predefined RC database and selfteach/learn  
mode. It consists of 5 profiles that include, TV, DVD, VCR,  
AUDIO and OTHER. Each profile can have up to 32 keys or  
functions so you can use your PDAs hardware keys or touch  
screen to navigate and control each individual device.  
This application turns your i830 PDA phone into a universal  
remote that lets you wirelessly control your infrared (IR)  
controlled devices. One unit that replaces all of your remote  
controls.  
the game.  
Solitaire_i830  
1. Tap Start located in the upper left corner of the screen.  
2. Tap Programs.  
3. Tap Games, then select Solitaire.  
4. Tap New to display a new game. Play is ready to begin.  
5. Select Tools and then tap Options to display the options  
screen for the game.  
Beam  
6. Change the options you want and then press  
to return to  
Your i830 can receive and transmit files using its builtin  
infrared (IR) port. However, you must set your i830 to accept  
incoming beams before receiving files.  
the game.  
SD I/O Expansion Slot  
The SD I/O Slot on the left side of the i830 is for use with an SD  
(secure digital) card. SD cards come in a variety of sizes and  
can hold up to 1 gigabyte of data. Download and use  
applications, games, and more using the enhanced storage  
capacity of the SD card.  
82  
Acessories  
Games  
83  
 
84  
Games  
 
Health and safety  
information  
Exposure to radio frequency (RF)  
signals  
Your wireless phone is a radio transmitter and  
receiver. It is designed and manufactured not to  
exceed the emission limits for exposure to radio  
frequency (RF) energy set by the Federal  
Communications Commission (FCC) of the U.S.  
Government. These limits are part of  
comprehensive guidelines and establish permitted  
levels of RF energy for the general population. The  
guidelines are based on the safety standards that  
were developed by independent scientific  
organizations through periodic and through  
evaluation of scientific studies.  
The standards include a substantial safety margin  
designed to assure the safety of all persons,  
regardless of age and health.  
The exposure standard for wireless phones  
employs a unit of measurement known as Specific  
Absorption Rate (SAR). The SAR limit set by the  
FCC is 1.6W/kg.*  
* In the U.S. and Canada, the SAR limit for mobile  
phones used by the public is 1.6 watts/kg (W/kg)  
averaged over one gram of tissue. The standard  
incorporates a substantial margin of safety to give  
additional protection for the public and to account  
for any variations in measurements.  
85  
 
SAR tests are conducted using standard operating  
positions specified by the FCC with the phone  
transmitting at its highest certified power level in  
all tested frequency bands. Although the SAR is  
determined at the highest certified power level,  
the actual SAR level of the phone while operating  
can be well below the maximum value. This is  
because the phone is designed to operate at  
multiple power levels so as to use only the power  
required to reach the network. In general, the  
closer you are to a wireless base station antenna,  
the lower the power output of the phone.  
For body operation  
SAR compliance for body-worn operating configurations  
is limited to the specific belt-clip/holster supplied  
or approved by SAMSUNG, if available. The use  
of accessories that do not satisfy these requirements  
may not comply with FCC RF exposure compliance  
and should be avoided.  
Before a new model phone is available for sale to  
the public, it must be tested and certified to the  
FCC that it does not exceed the limit established  
by the government-adopted requirement for safe  
exposure. The tests are performed in positions  
and locations (e.g., at the ear and worn on the  
body) as required by the FCC for each model.  
While there may be differences between the SAR  
levels of various phones and at various positions,  
they all meet the government requirement.  
None compliance with the above conditions may  
violate FCC RF exposure guidelines.  
For more Information concerning exposure to  
radio frequency signals, see the following  
websites:  
Federal Communications Commission (FCC)  
Cellular Telecommunications Industry Association  
The FCC has granted an Equipment Authorization  
for this model phone with all reported SAR levels  
evaluated as in compliance with the FCC RF  
exposure guidelines. SAR information on this  
model phone is on file with the FCC and can be  
found under the Display Grant section of http://  
printed in the label on the phone.  
U.S.Food and Drug Administration (FDA)  
World Health Organization (WHO)  
FCC certification information for this model phone  
is attached separation paper.  
86  
87  
 
• Do not leave the battery in hot or cold places,  
such as in a car in summer or winter conditions,  
as you will reduce the capacity and lifetime of  
the battery. Always try to keep the battery at  
room temperature. A phone with a hot or cold  
battery may temporarily not work, even when  
the battery is fully charged. Li-ion batteries are  
particularly affected by temperatures below 0  
°C (32 °F).  
Precautions when using batteries  
• Never use any charger or battery that is  
damaged in any way.  
• Use the battery only for its intended purpose.  
• If you use the phone near the network’s base  
station, it uses less power; talk and standby  
time are greatly affected by the signal strength  
on the cellular network and the parameters set  
by the network operator.  
• Do not short-circuit the battery. Accidental  
short- circuiting can occur when a metallic  
object (coin, clip or pen) causes a direct  
connection between the + and – terminals of  
the battery (metal strips on the battery), for  
example when you carry a spare battery in a  
pocket or bag. Short-circuiting the terminals  
may damage the battery or the object causing  
the short-circuiting.  
• Battery charging time depends on the remaining  
battery charge, the type of battery, and the  
charger used. The battery can be charged and  
discharged hundreds of times, but it will  
gradually wear out. When the operation time  
(talk time and standby time) is noticeably  
shorter than normal, it is time to buy a new  
battery.  
• Dispose of used batteries in accordance with  
local regulations. Always recycle. Do not dispose  
of batteries in a fire.  
• If left unused, a fully charged battery will  
discharge itself over time.  
• Use only Samsung-approved batteries and  
recharge your battery only with Samsung-  
approved chargers. When a charger is not in  
use, disconnect it from the power source. Do  
not leave the battery connected to a charger for  
more than a week, since overcharging may  
shorten its life.  
Road safety  
Your wireless phone gives you the powerful ability  
to communicate by voice, almost anywhere,  
anytime. But an important responsibility  
accompanies the benefits of wireless phones, one  
that every user must uphold.  
• Extreme temperatures will affect the charging  
capacity of your battery: it may require cooling  
or warming first.  
When driving a car, driving is your first  
responsibility. When using your wireless phone  
behind the wheel of a car, make sure that you are  
following the special regulations in a given area or  
country.  
88  
89  
 
Persons with pacemakers:  
Operating environment  
• Should always keep the phone more than 15 cm  
(6 inches) from their pacemaker when the  
phone is switched on  
Remember to follow any special regulations in  
force in any area and always switch your phone off  
whenever it is forbidden to use it, or when it may  
cause interference or danger.  
• Should not carry the phone in a breast pocket  
• Should use the ear opposite the pacemaker to  
minimize potential interference  
When connecting the phone or any accessory to  
another device, read its user’s guide for detailed  
safety instructions. Do not connect incompatible  
products.  
If you have any reason to suspect that  
interference is taking place, switch your phone off  
immediately.  
As with other mobile radio transmitting  
equipment, users are advised that for the  
satisfactory operation of the equipment and for  
the safety of personnel, it is recommended that  
the equipment should only be used in the normal  
operating position (held to your ear with the  
antenna pointing over your shoulder).  
Hearing aids  
Some digital wireless phones may interfere with  
some hearing aids. In the event of such  
interference, you may wish to consult your  
hearing aid manufacturer to discuss alternatives.  
Other medical devices  
Electronic devices  
If you use any other personal medical devices,  
consult the manufacturer of your device to  
determine if it is adequately shielded from  
external RF energy. Your physician may be able to  
assist you in obtaining this information. Switch  
your phone off in health care facilities when any  
regulations posted in these areas instruct you to  
do so. Hospitals or health care facilities may be  
using equipment that could be sensitive to  
external RF energy.  
Most modern electronic equipment is shielded  
from radio frequency (RF) signals. However,  
certain electronic equipment may not be shielded  
against the RF signals from your wireless phone.  
Consult the manufacturer to discuss alternatives.  
Pacemakers  
Pacemaker manufacturers recommend that a  
minimum distance of 15 cm (6 inches) be  
maintained between a wireless phone and a  
pacemaker to avoid potential interference with the  
pacemaker. These recommendations are  
consistent with the independent research and  
recommendations of Wireless Technology  
Research.  
90  
91  
 
Vehicles  
Emergency calls  
RF signals may affect improperly installed or  
inadequately shielded electronic systems in motor  
vehicles. Check with the manufacturer or its  
representative regarding your vehicle.  
This phone, like any wireless phone, operates  
using radio signals, wireless and landline networks  
as well as user-programed functions, which cannot  
guarantee connection in all conditions. Therefore,  
you should never rely solely on any wireless phone  
for essential communications (medical  
You should also consult the manufacturer of any  
equipment that has been added to your vehicle.  
emergencies, for example).  
Remember, to make or receive any calls the phone  
must be switched on and in a service area with  
adequate signal strength. Emergency calls may  
not be possible on all wireless phone networks or  
when certain network services and/or phone  
features are in use. Check with local service  
providers.  
Posted facilities  
Switch your phone off in any facility where posted  
notices require you to do so.  
Potentially explosive environment  
To make an emergency call:  
Switch your phone off when in any area with a  
potentially explosive atmosphere and obey all  
signs and instructions. Sparks in such areas could  
cause an explosion or fire resulting in bodily injury  
or even death.  
1. If the phone is not on, switch it on.  
2. Key in the emergency number for your present  
location. Emergency numbers vary by location.  
Users are advised to switch the phone off while at  
a refueling point (service station). Users are  
reminded of the need to observe restrictions on  
the use of radio equipment in fuel depots (fuel  
storage and distribution areas), chemical plants or  
where blasting operations are in progress.  
3. Press  
.
If certain features are in use (call barring, for  
example), you may first need to deactivate those  
features before you can make an emergency call.  
Consult this document and your local cellular  
service provider.  
Areas with a potentially explosive atmosphere are  
often but not always clearly marked. They include  
the areas below decks on boats, chemical transfer  
or storage facilities, vehicles using liquefied  
petroleum gas (such as propane or butane), areas  
where the air contains chemicals or particles, such  
as grain, dust or metal powders, and any other  
area where you would normally be advised to turn  
off your vehicle engine.  
When making an emergency call, remember to  
give all the necessary information as accurately as  
possible. Remember that your phone may be the  
only means of communication at the scene of an  
accident; do not end the call until given  
permission to do so.  
92  
93  
 
Other important safety information  
Care and maintenance  
• Only qualified personnel should service the  
phone or install the phone in a vehicle. Faulty  
installation or service may be dangerous and  
may invalidate any warranty applicable to the  
device.  
Your phone is a product of superior design and  
craftsmanship and should be treated with care.  
The suggestions below will help you fulfill any  
warranty obligations and allow you to enjoy this  
product for many years.  
• Check regularly that all wireless phone  
equipment in your vehicle is mounted and  
operating properly.  
• Keep the phone and all its parts and accessories  
out of the reach of small children’s.  
• Keep the phone dry. Precipitation, humidity and  
liquids contain minerals that will corrode  
electronic circuits.  
• Do not store or carry flammable liquids, gases  
or explosive materials in the same compartment  
as the phone, its parts or accessories.  
• Do not use the phone with a wet hand. Doing so  
may cause an electric shock to you or damage  
to the phone.  
• For vehicles equipped with an air bag,  
remember that an air bag inflates with great  
force. Do not place objects, including both  
installed or portable wireless equipment in the  
area over the air bag or in the air bag  
deployment area. If wireless equipment is  
improperly installed and the air bag inflates,  
serious injury could result.  
• Do not use or store the phone in dusty, dirty  
areas, as its moving parts may be damaged.  
• Do not store the phone in hot areas. High  
temperatures can shorten the life of electronic  
devices, damage batteries, and warp or melt  
certain plastics.  
• Switch your phone off before boarding an  
aircraft. The use of wireless phones in an  
aircraft may be dangerous to the operation of  
the aircraft, and is illegal.  
• Do not store the phone in cold areas. When the  
phone warms up to its normal operating  
temperature, moisture can form inside the  
phone, which may damage the phone’s  
electronic circuit boards.  
• Failure to observe these instructions may lead  
to the suspension or denial of telephone  
services to the offender, or legal action, or both.  
• Do not drop, knock or shake the phone. Rough  
handling can break internal circuit boards.  
• Do not use harsh chemicals, cleaning solvents  
or strong detergents to clean the phone. Wipe it  
with a soft cloth slightly dampened in a mild  
soap-and-water solution.  
• Do not paint the phone. Paint can clog the  
device’s moving parts and prevent proper  
operation.  
94  
95  
 
• Do not put the phone in or on heating devices,  
such as a microwave oven, a stove or a radiator.  
The phone may explode when overheated.  
Information to user  
This equipment has been tested and found to  
comply with the limits for a Class B digital device,  
pursuant to part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection  
against harmful interference in a residential  
installation.  
• Use only the supplied or an approved  
replacement antenna. Unauthorized antennas or  
modified accessories may damage the phone  
and violate regulations governing radio devices.  
• If the phone, battery, charger or any accessory  
is not working properly, take it to your nearest  
qualified service facility. The personnel there will  
assist you, and if necessary, arrange for service.  
This equipment generates, uses and can radiate  
radio frequency energy and, if not installed and  
used in accordance with the instructions, may  
cause harmful interference to radio  
communications. However, there is no guarantee  
that interference will not occur in a particular  
installation. If this equipment does cause harmful  
interference to radio or television reception, which  
can be determined by turning the equipment off  
and on, the user is encouraged to try to correct  
the interference by one or more of the following  
measures:  
Acknowledging special precautions  
and the FCC and industry canada  
notice  
Cautions  
• Reorient or relocate the receiving antenna.  
Modifications not expressly approved by the party  
responsible for compliance could void the user's  
authority to operate the equipment.  
• Increase the separation between the equipment  
and receiver.  
• Connect the equipment into an outlet on a  
circuit different from that to which the receiver  
is connected.  
FCC compliance information  
• Consult the dealer or an experienced radio/ TV  
technician for help.  
This device complies with Part 15 of FCC Rules.  
Operation is subject to the following two  
conditions:  
(1) This device may not cause harmful  
interference.  
(2) This device must accept any interference  
received. Including interference that may  
cause undesired operation.  
96  
97  
 
Before a new model phone is available for sale to  
the public, it must be tested and certified to the  
FCC that it does not exceed the limit established  
by the government-adopted requirement for safe  
exposure. The tests are performed in positions  
and locations (e.g.,at the ear and worn on the  
body) as required by the FCC for each model.  
Appendix A: CERTIFICATION  
INFORMATION (SAR)  
THIS MODEL PHONE MEETS THE GOVERNMENT ’S  
REQUIREMENTS FOR EXPOSURE TO RADIO  
WAVES. Your wireless phone is a radio transmitter  
and receiver. It is designed and manufactured not  
to exceed the emission limits for exposure to radio  
frequency (RF) energy set by the Federal  
Communications Commission of the U.S.  
Government. These limits are part of  
comprehensive guidelines and establish permitted  
levels of RF energy for the general population. The  
guidelines are based on safety standards that  
were developed by independent scientific  
organizations through periodic and thorough  
evaluation of scientific studies. The standards  
include a substantial safety margin designed to  
assure the safety of all persons, regardless of age  
and health.  
The highest SAR values for this model phone as  
reported to the FCC are Head:1.17W/Kg(CDMA),  
1.17(PCS), Body- worn:0.779W/Kg(CDMA),  
0.367(PCS).  
The FCC has granted an Equipment Authorization  
for this model phone with all reported SAR levels  
evaluated as in compliance with the FCC RF  
exposure guidelines. SAR information on this  
model phone is on file with the FCC and can be  
found under the Display Grant section of http://  
A3LSCHI830.  
The exposure standard for wireless mobile phones  
employs a unit of measurement known as the  
Specific Absorption Rate(SAR). The SAR limit set  
by the FCC is 1.6 W/kg. SAR Tests are conducted  
using standard operating positions accepted by  
the FCC with the phone transmitting at its highest  
certified power level in all tested frequency bands.  
Although the SAR is determined at the highest  
certified power level, the actual SAR level of the  
phone while operating can be well below the  
maximum value. This is because the phone is  
designed to operate at multiple power levels so as  
to use only the power required to reach the  
network. In general, the closer you are to a  
wireless base station antenna, the lower the  
power output.  
98  
99  
 
Glossary  
Glossary  
Airtime - Actual time spent talking on the  
wireless phone. Most carriers bill customers based  
on how many minutes of airtime they use each  
month.  
EVRC - (Enhanced Variable Rate Codec) EVRC is a  
new global standard for compressing and  
decompressing voice signals. EVRC uses a lower  
bit rate (the number of bits sent per second) than  
existing CDMA vocoders, while providing  
significant improvements in voice quality. This  
technology enables your phone to provide superb  
voice quality while benefiting from the ability to  
process more cellular voice calls using less  
bandwidth than the voice codecs in CDMA  
networks today.  
Antenna - A device for transmitting or receiving  
signals. The size and shape of antennas is  
determined, in part, by the frequency of the signal  
they receive. Wireless phones and the base  
station must have antennas.  
Base station - The fixed radio transmitter/  
receiver that maintains communications with  
mobile radio telephones within a given area.  
(Typically called a cell or cell site)  
Frequency - A measure based on time, as one or  
more waves per second, in an electrical or light  
wave information signal. A signal’s frequency is  
stated in cycles-per-second or Hertz (Hz).  
CDMA - (Code Division Multiple Access) A spread-  
spectrum approach to digital transmission. With  
CDMA, each conversion is digitized and then  
tagged with a code. The mobile phone deciphers  
only a particular code to pick the right  
conversation off the air. The transmitted signal is  
just above noise level across the available  
bandwidth.  
Hands-free - A feature that permits a driver to  
use a wireless phone without lifting or holding the  
handset - an important safety feature for  
automobiles, tractors and most other motorized  
vehicles.  
LCD - (Liquid Crystal Display) Commonly used to  
refer to the screen display on the wireless phone.  
LED - (Light Emitting Diode) Commonly used to  
refer to a small light on the wireless phone or on  
the Desktop Charger. The LED lights on the phone  
to indicate an incoming call. The lights on the  
charger indicate that battery charging is taking  
place.  
Channel - Communications signals transmit along  
paths called channels.  
Codec - Compression & Decompression.  
Deactivation - The process of rendering a  
wireless phone inactive.  
Prepend - The addition of a prefix, such as an  
area code, to a phone number.  
DTMF - (Dual-tone Multi-Frequency) You send  
DTMF signals when you enter numbers by  
pressing the digit keys.  
RF - Radio Frequency  
Roaming - The ability to use a wireless phone to  
make and receive calls in places outside of the  
home service area.  
100  
101  
 
Glossary  
Service charge - The amount paid each month to  
receive wireless service.  
Soft keys - Two keys  
and  
on the phone,  
the purpose of which:  
• varies according to the function that you are  
currently using.  
• is indicated on the bottom line of the display  
just above the corresponding key.  
Standby time - The amount of time a fully  
charged wireless portable or transportable phone  
can be on and idle without being in use. (See Talk  
time.)  
Talk time - The length of time a person can talk  
on a portable or transportable wireless phone  
without recharging the battery.  
Vocoder - Voice coder. A device used to convert  
speech into digital signals.  
Wireless - Radio-based Systems that allow  
transmission of telephone or data signals through  
the air without a physical connection, such as a  
metal wire (copper) or fiber optic cable.  
102  
 

Milwaukee Power Hammer 5314 21 User Manual
Multiquip Portable Generator GAC22H User Manual
Multi Tech Systems Network Card CC1600 Series User Manual
National Instruments Computer Hardware 320174B 01 User Manual
NETGEAR Network Card XAU2511 User Manual
NordicTrack Treadmill NTL15921 User Manual
Optoma Technology Projector TX727 User Manual
Orion Car Audio Car Amplifier 2100HCCA User Manual
Panasonic Laptop CF 52Mk2 User Manual
Panasonic Network Card 2SD1149 User Manual