Owner’s Manual
VGA with RS232 Serial Over
Cat5 Extender Wallplate Kit
Model: B130-101S-WP
Safety Information
2
2
Package Contents
Product Features
Optional Accessories
Specifications
2-3
3
3
Features
4
Installation
5-6
6
Warranty & Warranty Registration
Español
7
Français
13
1111 W. 35th Street, Chicago, IL 60609 USA
Note: Follow these instructions to ensure proper operation and prevent damage
to this device and its connected equipment.
Copyright © 2009 Tripp Lite. All rights reserved.
All trademarks are the property of their respective owners.
Product Features
•
Remotely operates serial devices such as touch-screen monitors or barcode
scanners
•
•
•
•
Provides a connection for optional local monitor
Features built-in Equalization and Gain controls to adjust the video image
Supports video resolutions up to 1920x1440
No drivers required
Optional Accessories
•
•
•
•
•
•
P502-Series Monitor Cables with RGB Coax, HD15 Male/Male
P520-006 DB9 M/F Extension Cable, 6ft.
P524-Series Zero-Skew UTP Bulk Cable
N020-01K-GY Cat5e Bulk Stranded Cable, 1000 ft.
N022-01K-GY Cat5e Bulk Solid Cable, 1000 ft.
N222-01K-GY Cat6 Bulk Solid Cable, 1000 ft.
Specifications
Signal Type
Video Amplifier Bandwidth
Input DDC Signal
VGA, SVGA, XGA, UXGA and WUXGA
350 Mbps
0.7 Volts p-p (TTL)
Signal Noise Ration
Local Unit Ports
90 dB
(1) HD15 Female, (1) 3.5mm Female,
(1) 110 Punchdown Female
(1) HD15 Female, (1) 3.5mm Female,
(1) 110 Punchdown Female
(2) 5V, 2.0A DC Power Supplies
2.75 in. (W) x 4.5 in. (H) x 1.1 in. (D)
2.75 in. (W) x 4.5 in. (H) x 1.1 in. (D)
0.2 lb
Remote Unit Ports
Power Supply
Dimensions (Local Unit)
Dimensions (Remote Unit)
Local Unit Weight
Remote Unit Weight
0.2 lb
Note: Specifications are subject to change without notice. Mass and dimensions are
approximate; please take the actual products as the standard.
3
Features
Source Video-In Port: HD15 Female Connector.
1
2
Power LED: This LED illuminates when the external power supply is
connected and the unit is receiving power.
Local Serial Port: The included 3.5 mm Male to DB9 Female adapter
cable plugs into this 3.5 mm Female port.
3
Power Jack: The 5V, 2A external power supply plugs in here.
4
5
110 Punchdown Connector: Connect Cat5/5e/6 cable between the 110
Punchdown Connectors on the local and remote units.
Remote Unit Video-Out Port: HD15 Female Connector.
6
7
Remote Serial Port: The included 3.5 mm Male to DB9 Male adapter
cable plugs into this 3.5 mm Female port.
Gain Adjustment: Adjusts brightness.
8
9
EQ Adjustment: Adjusts equalization length.
Local Unit (By Source)
Remote Unit (By Display)
Local
Remote
3
7
2
INPUT
RS232
OUTPUT
RS232
2
1
Power
Power
Gain
6
8
9
4
EQ
4
DC5V, 2.0A
DC5V, 2.0A
Rear
5
4
Installation
5
4
9
1
2
7
10
3
8
6
11
Connect the Male end of the VGA splitter cable to the HD15 port on the
source computer.
1
2
3
4
5
6
7
Connect one of the Female ends of the VGA splitter cable to the Local
Unit’s HD15 port using a VGA cable.
(Optional) Connect a local monitor to the remaining Female connector
of the VGA splitter cable using a VGA cable.
Connect the included 3.5 mm Male to DB9 Female adapter cable to the
3.5 mm Female port on the local unit.
Connect the DB9 port on the computer to the DB9 port on the adapter
cable.
Connect the external power supply to the power jack on the local unit
and plug it into an appropriate power source.
Connect the 110 Punchdown Connector on the local unit to the 110
Punchdown Connector on the remote unit using Cat5/5e/6 cable.
Connect the HD15 port on the remote unit to a monitor.
Connect the included 3.5 mm Male to DB9 Male adapter cable to the
3.5 mm Female port on the remote unit.
8
9
Connect the DB9 Male port on the adapter cable to the DB9 port of the
serial device you are connecting (touch-screen monitor, barcode
scanner, etc).
10
11
Connect the external power supply to the power jack on the remote unit
and plug it into an appropriate power source.
Turn the display(s) on first.
Turn on the computer.
12
13
5
Installation
If the video on your monitor is either too dark or too light, use the Gain
Adjustment on the remote unit.
14
15
If the video on your monitor is fuzzy, or shows a ghosting effect, use the
EQ Adjustment on the remote unit.
Warranty & Warranty Registration
1-Year Limited Warranty
TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one
(1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing
or replacing (at its sole option) any such defective products. To obtain service under this warranty, you must
obtain a Returned Material Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE
service center. Products must be returned to TRIPP LITE or an authorized TRIPP LITE service center with
transportation charges prepaid and must be accompanied by a brief description of the problem encountered
and proof of date and place of purchase. This warranty does not apply to equipment which has been damaged
by accident, negligence or misapplication or has been altered or modified in any way.
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A
PARTICULAR
PURPOSE. Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid
limitation(s) or exclusion(s) may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT,
INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE
OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically,
TRIPP LITE is not liable for any costs, such as lost profits or revenue, loss of equipment, loss of use of
equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise.
WARRANTY REGISTRATION
Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You’ll be
automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
WEEE Compliance Information for Tripp Lite Customers and Recyclers
(European Union)
Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations,
when customers buy new electrical and electronic equipment from Tripp Lite they are entitled to:
•
Send old equipment for recycling on
country)
a
one-for-one, like-for-like basis (this varies depending on the
•
Send the new equipment back for recycling when this ultimately becomes waste
Tripp Lite follows a policy of continuous improvement. Product specifications are subject to change without
notice.
1111 W. 35th Street, Chicago, IL 60609 USA
200908073 932931-EN
6
|